Discussion:
can't decompress files to set up Fax Services
(too old to reply)
Rebecca S
2005-04-18 05:08:02 UTC
Permalink
Im trying to set up the fax feature. My computer is new and came with SP2
pre-installed.

When I try to add fax services from windows components wizard, I get the
message : "Setup cannot copy the file fxsperf.dl_ "

I read in another post that I might need to decompress the files with the
"Win32 Cabinet Self-Extractor" but when I try to do that with the files in
the I386 folder I get the message "a required resource cannot be located"

Any Ideas on what I should try next?

thanks
rebecca
Byte
2005-04-18 17:28:03 UTC
Permalink
To enable ZIP folder support run this command: regsvr32 zipfldr.dll.
Restart Windows for the change to take effect.
Post by Rebecca S
Im trying to set up the fax feature. My computer is new and came with SP2
pre-installed.
When I try to add fax services from windows components wizard, I get the
message : "Setup cannot copy the file fxsperf.dl_ "
I read in another post that I might need to decompress the files with the
"Win32 Cabinet Self-Extractor" but when I try to do that with the files in
the I386 folder I get the message "a required resource cannot be located"
Any Ideas on what I should try next?
thanks
rebecca
Rebecca S
2005-04-19 17:09:03 UTC
Permalink
I did that but I'm still getting the same error messages.
any other ideas?
rebecca
Post by Byte
To enable ZIP folder support run this command: regsvr32 zipfldr.dll.
Restart Windows for the change to take effect.
Post by Rebecca S
Im trying to set up the fax feature. My computer is new and came with SP2
pre-installed.
When I try to add fax services from windows components wizard, I get the
message : "Setup cannot copy the file fxsperf.dl_ "
I read in another post that I might need to decompress the files with the
"Win32 Cabinet Self-Extractor" but when I try to do that with the files in
the I386 folder I get the message "a required resource cannot be located"
Any Ideas on what I should try next?
thanks
rebecca
Byte
2005-04-20 15:04:06 UTC
Permalink
You can do a Search of your harddrive for the fxsperf.dll file. But, you
should already have a copy of it in: C:\Windows\ServicePackFiles\i386
If it is listed as fxsperf.dl_ that means it is zipped/compressed.
If it is listed as fxsperf.dll then you can copy/paste or drag and drop it.
Post by Rebecca S
I did that but I'm still getting the same error messages.
any other ideas?
rebecca
Post by Byte
To enable ZIP folder support run this command: regsvr32 zipfldr.dll.
Restart Windows for the change to take effect.
Post by Rebecca S
Im trying to set up the fax feature. My computer is new and came with SP2
pre-installed.
When I try to add fax services from windows components wizard, I get the
message : "Setup cannot copy the file fxsperf.dl_ "
I read in another post that I might need to decompress the files with the
"Win32 Cabinet Self-Extractor" but when I try to do that with the files in
the I386 folder I get the message "a required resource cannot be located"
Any Ideas on what I should try next?
thanks
rebecca
Rebecca S
2005-04-21 01:24:01 UTC
Permalink
it's a .dl_ file, and I can't get it (or any of them) to decompress.
rebecca
Post by Byte
You can do a Search of your harddrive for the fxsperf.dll file. But, you
should already have a copy of it in: C:\Windows\ServicePackFiles\i386
If it is listed as fxsperf.dl_ that means it is zipped/compressed.
If it is listed as fxsperf.dll then you can copy/paste or drag and drop it.
Post by Rebecca S
I did that but I'm still getting the same error messages.
any other ideas?
rebecca
Post by Byte
To enable ZIP folder support run this command: regsvr32 zipfldr.dll.
Restart Windows for the change to take effect.
Post by Rebecca S
Im trying to set up the fax feature. My computer is new and came with SP2
pre-installed.
When I try to add fax services from windows components wizard, I get the
message : "Setup cannot copy the file fxsperf.dl_ "
I read in another post that I might need to decompress the files with the
"Win32 Cabinet Self-Extractor" but when I try to do that with the files in
the I386 folder I get the message "a required resource cannot be located"
Any Ideas on what I should try next?
thanks
rebecca
DAVID MURPHY
2005-04-28 21:31:11 UTC
Permalink
1. Click on the Windows Start Menu.

2. Click Run.

3. Type esentutl /p %windir%\security\database\secedit.sdb in the Open
box, and click OK.

4. Install IIS through the Control Panel Add/Remove Windows Components
applet.



And Bob's your uncle
Post by Rebecca S
it's a .dl_ file, and I can't get it (or any of them) to decompress.
rebecca
Post by Byte
You can do a Search of your harddrive for the fxsperf.dll file. But, you
should already have a copy of it in: C:\Windows\ServicePackFiles\i386
If it is listed as fxsperf.dl_ that means it is zipped/compressed.
If it is listed as fxsperf.dll then you can copy/paste or drag and drop it.
Post by Rebecca S
I did that but I'm still getting the same error messages.
any other ideas?
rebecca
Post by Byte
To enable ZIP folder support run this command: regsvr32 zipfldr.dll.
Restart Windows for the change to take effect.
Post by Rebecca S
Im trying to set up the fax feature. My computer is new and came with SP2
pre-installed.
When I try to add fax services from windows components wizard, I get the
message : "Setup cannot copy the file fxsperf.dl_ "
I read in another post that I might need to decompress the files with the
"Win32 Cabinet Self-Extractor" but when I try to do that with the files in
the I386 folder I get the message "a required resource cannot be located"
Any Ideas on what I should try next?
thanks
rebecca
Rebecca S
2005-04-29 05:54:03 UTC
Permalink
Thank You!!
It's working now.
rebecca
Post by DAVID MURPHY
1. Click on the Windows Start Menu.
2. Click Run.
3. Type esentutl /p %windir%\security\database\secedit.sdb in the Open
box, and click OK.
4. Install IIS through the Control Panel Add/Remove Windows Components
applet.
And Bob's your uncle
Post by Rebecca S
it's a .dl_ file, and I can't get it (or any of them) to decompress.
rebecca
Post by Byte
You can do a Search of your harddrive for the fxsperf.dll file. But, you
should already have a copy of it in: C:\Windows\ServicePackFiles\i386
If it is listed as fxsperf.dl_ that means it is zipped/compressed.
If it is listed as fxsperf.dll then you can copy/paste or drag and drop it.
Post by Rebecca S
I did that but I'm still getting the same error messages.
any other ideas?
rebecca
Post by Byte
To enable ZIP folder support run this command: regsvr32 zipfldr.dll.
Restart Windows for the change to take effect.
Post by Rebecca S
Im trying to set up the fax feature. My computer is new and came
with SP2
pre-installed.
When I try to add fax services from windows components wizard, I
get the
message : "Setup cannot copy the file fxsperf.dl_ "
I read in another post that I might need to decompress the files with the
"Win32 Cabinet Self-Extractor" but when I try to do that with the
files in
the I386 folder I get the message "a required resource cannot be
located"
Any Ideas on what I should try next?
thanks
rebecca
angie
2006-05-05 08:52:01 UTC
Permalink
thank you great help
Post by DAVID MURPHY
1. Click on the Windows Start Menu.
2. Click Run.
3. Type esentutl /p %windir%\security\database\secedit.sdb in the Open
box, and click OK.
4. Install IIS through the Control Panel Add/Remove Windows Components
applet.
And Bob's your uncle
Post by Rebecca S
it's a .dl_ file, and I can't get it (or any of them) to decompress.
rebecca
Post by Byte
You can do a Search of your harddrive for the fxsperf.dll file. But, you
should already have a copy of it in: C:\Windows\ServicePackFiles\i386
If it is listed as fxsperf.dl_ that means it is zipped/compressed.
If it is listed as fxsperf.dll then you can copy/paste or drag and drop it.
Post by Rebecca S
I did that but I'm still getting the same error messages.
any other ideas?
rebecca
Post by Byte
To enable ZIP folder support run this command: regsvr32 zipfldr.dll.
Restart Windows for the change to take effect.
Post by Rebecca S
Im trying to set up the fax feature. My computer is new and came
with SP2
pre-installed.
When I try to add fax services from windows components wizard, I
get the
message : "Setup cannot copy the file fxsperf.dl_ "
I read in another post that I might need to decompress the files with the
"Win32 Cabinet Self-Extractor" but when I try to do that with the
files in
the I386 folder I get the message "a required resource cannot be
located"
Any Ideas on what I should try next?
thanks
rebecca
j***@gofederal.com.tw
2017-03-14 06:42:54 UTC
Permalink
DAVID MURPHY於 2005年4月29日星期五 UTC+8上午5時31分11秒寫道：
Post by DAVID MURPHY
1. Click on the Windows Start Menu.
2. Click Run.
3. Type esentutl /p %windir%\security\database\secedit.sdb in the Open
box, and click OK.
4. Install IIS through the Control Panel Add/Remove Windows Components
applet.
And Bob's your uncle
Post by Rebecca S
it's a .dl_ file, and I can't get it (or any of them) to decompress.
rebecca
Post by Byte
You can do a Search of your harddrive for the fxsperf.dll file. But, you
should already have a copy of it in: C:\Windows\ServicePackFiles\i386
If it is listed as fxsperf.dl_ that means it is zipped/compressed.
If it is listed as fxsperf.dll then you can copy/paste or drag and drop it.
Post by Rebecca S
I did that but I'm still getting the same error messages.
any other ideas?
rebecca
Post by Byte
To enable ZIP folder support run this command: regsvr32 zipfldr.dll.
Restart Windows for the change to take effect.
Post by Rebecca S
Im trying to set up the fax feature. My computer is new and came
with SP2
pre-installed.
When I try to add fax services from windows components wizard, I
get the
message : "Setup cannot copy the file fxsperf.dl_ "
I read in another post that I might need to decompress the files with the
"Win32 Cabinet Self-Extractor" but when I try to do that with the
files in
the I386 folder I get the message "a required resource cannot be
located"
Any Ideas on what I should try next?
thanks
rebecca
Thanks a lot!!
It still works on Windows Server 2003 R2.

Loading...